| Customization: | Available |
|---|---|
| Usage: | Light |
| Output Type: | Single |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Mean Well ELG-300 Series LED Driver 300W 12V 24V IP65 Waterproof LED Driver
Features:
Constant Voltage + Constant Current mode output
Protection Functions: OCP,SCP,OVP,OTP
IP67 rating for indoor or outdoor installations
Output adjustable via potentiometer
Typical lifetime>50000 hours
5 years warranty
| MODEL | ELG-300-12A | ELG-300-24A | ||
OUTPUT |
DC VOLTAGE | 12V | 24V | |
| CONSTANT CURRENT REGION Note.2 | 10~ 12V | 14.4~ 24V | ||
| RATED CURRENT | 200VAC ~ 305VAC | 22A | 12.5A | |
| 100VAC ~ 180VAC | 18.7A | 10.63A | ||
| RATED POWER | 200VAC ~ 305VAC | 264W | 300W | |
| 100VAC ~ 180VAC | 224.4W | 255W | ||
| RIPPLE & NOISE (max.) Note.3 | 150mVp-p | 240mVp-p | ||
| VOLTAGE ADJ. RANGE | 11.2 ~12.8V | 22.4 ~25.6V | ||
| CURRENT ADJ. RANGE | 11 ~ 22A | 6.25 ~ 12.5A | ||
| VOLTAGE TOLERANCE Note.4 | ±3.0% | ±2.0% | ||
| LINE REGULATION | ±0.5% | ±0.5% | ||
| LOAD REGULATION | ±2.0% | ±1.0% | ||
| SETUP, RISE TIME Note.6 | 500ms, 100ms/230VAC, 500ms, 100ms/115VAC | |||
| HOLD UP TIME (Typ.) | 10ms/ 230VAC 10ms/ 115VAC | |||
INPUT |
VOLTAGE RANGE Note.5 | 100 ~ 305VAC 142 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) |
||
| FREQUENCY RANGE | 47 ~ 63Hz | |||
| POWER FACTOR | PF>=0.95/115VAC, PF>=0.93/230VAC, PF>=0.90/277VAC@full load | |||
| TOTAL HARMONIC DISTORTION | THD< 10%(@load>=50%/115VC,230VAC; @load>=75%/277VAC) | |||
| EFFICIENCY (Typ.) | 91% | 94% | ||
| AC CURRENT | 3A / 115VAC 1.6A / 230VAC 1.3A/277VAC | |||
| INRUSH CURRENT(Typ.) | COLD START 45A(twidth=1200μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 | |||
| MAX. No. of PSUs on 16A CIRCUIT BREAKER | 2 units (circuit breaker of type B) / 4 units (circuit breaker of type C) at 230VAC | |||
| LEAKAGE CURRENT | <0.75mA / 277VAC | |||
PROTECTION |
OVER CURRENT | 95 ~ 108% | ||
| Constant current limiting, recovers automatically after fault condition is removed | ||||
| SHORT CIRCUIT | Constant current limiting, recovers automatically after fault condition is removed | |||
| OVER VOLTAGE | 13.5 ~ 17V | 27 ~ 34V | ||
| Shut down output voltage, re-power on to recover | ||||
| OVER TEMPERATURE | Shut down output voltage, re-power on to recover | |||
ENVIRONMENT |
WORKING TEMP. | Tcase=-40 ~ +85ºC (Please refer to " OUTPUT LOAD vs TEMPERATURE" section) | ||
| MAX. CASE TEMP. | Tcase=+85ºC | |||
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing | |||
| STORAGE TEMP., HUMIDITY | -40 ~ +80ºC, 10 ~ 95% RH | |||
| TEMP. COEFFICIENT | ±0.03%/ºC (0 ~ 60ºC) | |||
| VIBRATION | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | |||
SAFETY & EMC |
SAFETY STANDARDS | UL8750(type"HL")(Except for 12V), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384; EAC TP TC 004; GB19510.1,GB19510.14; KC61347-1,KC61347-2-13; IS15885(Part2/Sec13),IP67 approved | ||
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC | |||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC/ 70% RH | |||
| EMC EMISSION | Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load>=50%) ; BS EN/EN61000-3-3;KN15 | |||
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV),KN61547 | |||
OTHERS |
MTBF | 1827.7K hrs min. Telcordia SR-332 (Bellcore) ; 196.5Khrs min. MIL-HDBK-217F (25ºC) | ||
| DIMENSION | 246*77*39.5mm (L*W*H) | |||
| PACKING | 1.45 Kg; 9pcs /13.5Kg / 0.76CUFT | |||
){kind=link}