Customization: | Available |
---|---|
Usage: | Light |
Output Type: | Single |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Meanwell ELG-240 24V 42V 48V 54V 5A 240W 36V LED Transformer 0-10V Dimming LED Driver
Features:
Constant Voltage + Constant Current mode output
Metal housing design with functional Ground
Built-in active PFC function
No load / Standby power consumption <0.5W
IP67 / IP65 rating for indoor or outdoor installations
Function options: output adjustable via potentiometer;
3 in 1 dimming (dim-to-off); Smart timer dimming; DALI
Typical lifetime>50000 hours
5 years warranty
MODEL | ELG-240-24 | ELG-240-36 | ELG-240-42 | ELG-240-48 | ELG-240-54 | ||||
OUTPUT |
DC VOLTAGE | 24V | 36V | 42V | 48V | 54V | |||
CONSTANT CURRENT REGION Note.2 | 12 ~ 24V | 18 ~ 36V | 21 ~ 42V | 24 ~ 48V | 27 ~ 54V | ||||
RATED CURRENT | 10A | 6.66A | 5.71A | 5.0A | 4.45A | ||||
RATED POWER |
200VAC ~ 305VAC | ||||||||
240W | 239.76W | 239.82W | 240W | 240.3W | |||||
100VAC ~ 180VAC | |||||||||
180W | 180W | 179.76W | 180W | 180.36W | |||||
RIPPLE & NOISE (max.) Note.3 | 200mVp-p | 250mVp-p | 250mVp-p | 250mVp-p | 350mVp-p | ||||
VOLTAGE ADJ. RANGE | Adjustable for A/AB-Type only (via built-in potentiometer) | ||||||||
22.4 ~ 25.6V | 33.5 ~ 38.5V | 39 ~ 45V | 44.8 ~ 51.2V | 50 ~ 57V | |||||
CURRENT ADJ. RANGE | Adjustable for A/AB-Type only (via built-in potentiometer) | ||||||||
5 ~ 10A | 3.33 ~ 6.66A | 2.86 ~ 5.71A | 2.5 ~ 5A | 2.23 ~ 4.45A | |||||
VOLTAGE TOLERANCE Note.4 | ±2.0% | ±2.0% | ±2.0% | ±2.0% | ±2.0% | ||||
LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ||||
LOAD REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ||||
SETUP, RISE TIME Note.6 | 500ms, 100ms/230VAC, 1000ms, 100ms/115VAC | ||||||||
HOLD UP TIME (Typ.) | 10ms/ 230VAC 10ms/ 115VAC | ||||||||
INPUT |
VOLTAGE RANGE | Note.5 | 100 ~ 305VAC 142 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) |
||||||
FREQUENCY RANGE | 47 ~ 63Hz | ||||||||
POWER FACTOR | PF>=0.97/115VAC, PF>=0.95/230VAC, PF>=0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) |
||||||||
TOTAL HARMONIC DISTORTION | THD< 20%(@load>=50%/115VC,230VAC; @load>=75%/277VAC) (Please refer to "TOTAL HARMONIC DISTORTION(THD)" section) |
||||||||
EFFICIENCY (Typ.) | 92% | 92% | 92.5% | 93% | 93% | ||||
AC CURRENT | 2.2A / 115VAC | 1.5A / 230VAC 1.2A/277VAC | |||||||
INRUSH CURRENT(Typ.) | COLD START 60A(twidth=510μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 | ||||||||
MAX. No. of PSUs on 16A CIRCUIT BREAKER | 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC | ||||||||
LEAKAGE CURRENT | <0.75mA / 277VAC | ||||||||
NO LOAD / STANDBY POWER CONSUMPTION Note.7 |
No load power consumption <0.5W for Blank / A / Dx / D-Type Standby power consumption <0.5W for B / AB / DA-Type | ||||||||
PROTECTION |
OVER CURRENT | 95 ~ 108% | |||||||
Constant current limiting, recovers automatically after fault condition is removed | |||||||||
SHORT CIRCUIT | Hiccup mode, recovers automatically after fault condition is removed | ||||||||
OVER VOLTAGE | 27 ~ 34V | 42 ~ 49V | 47 ~ 54V | 54 ~ 63V | 60 ~ 67V | ||||
Shut down output voltage, re-power on to recover | |||||||||
OVER TEMPERATURE | Shut down output voltage, re-power on to recover | ||||||||
ENVIRONMENT |
WORKING TEMP. | Tcase=-40 ~ +90ºC (Please refer to " OUTPUT LOAD vs TEMPERATURE" section) | |||||||
MAX. CASE TEMP. | Tcase=+90ºC | ||||||||
WORKING HUMIDITY | 20 ~ 95% RH non-condensing | ||||||||
STORAGE TEMP., HUMIDITY | -40 ~ +90ºC, 10 ~ 95% RH | ||||||||
TEMP. COEFFICIENT | ±0.03%/ºC (0 ~ 60ºC) | ||||||||
VIBRATION | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | ||||||||
SAFETY & EMC |
SAFETY STANDARDS |
UL8750(type"HL"), CSA C22.2 No. 250.13-12;IEC/BS EN/EN/AS/NZS 61347-1, IEC/BS EN/EN/AS/NZS 61347-2-13 independent, BS EN/EN62384; EAC TP TC 004;BIS IS15885(for 24/24A/24B/24DA/36/36A/36B/42/42A/42B/48/48A/48B/54/54A/54ADA/54B only); GB19510.14,GB19510.1; IP65 or IP67;KC61347-1,KC61347-2-13 approved |
|||||||
DALI STANDARDS | Compliance to IEC62386-101,102,(207 by request) for DA Type only | ||||||||
WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC | ||||||||
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC/ 70% RH | ||||||||
EMC EMISSION | Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C (@load>=50%) ; BS EN/EN61000-3-3; GB17625.1,GB17743;EAC TP TC 020; KC KN15,KN61547 | ||||||||
EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV);EAC TP TC 02; KC KN15,KN61547 | ||||||||
OTHERS |
MTBF | 2391.4K hrs min. | Telcordia SR-332 (Bellcore) ; | 190.7K hrs min. | MIL-HDBK-217F (25ºC) | ||||
DIMENSION | 244*71*37.5mm (L*W*H) | ||||||||
PACKING | 1.22Kg; 12pcs / 15.2Kg / 0.72CUFT |